We all have seen or heard the sirens or bells at the work place at different interval of times. As the siren blows the employers are going into the premises of the workplace or production line and when it blows, they are back from. This is the common scene we all are aware of. This traditional method has been used for last many years. But they were manual which sometimes failed due to certain reason.
Now-a-days in the technological era the working of the sirens or bells have also been automated. Star Link developed Hooter InterfaceNow-a-days in the technological era the working of the sirens or bells have also been automated. Star Link developed Hooter Interface, which can be linked with solutions for proper effortless & precise working with accuracy. Different timings are set for its working through solution provided by Star Link.
Before proceeding forward I would like you to introduce what actually is Hooter Interface. It is basically an interface which is connected through the serial port with our system. It works on a single phase 10A output, which helps to blow the siren, hooter or bell connected to it.
The Hooter interface is connected to the device which is used for the attendance system through a serial port. Then the timings are fixed through solutions connected with it. It can accept maximum 25 time settings in a day. Additionally, the duration of sirens can vary from 1 to 99 seconds as per set value.
The best example of the hooter interface for blowing siren or bell is seen in schools, production units, coal mines, construction sites spread in larger dimensions and many other locations where many employers work together. Star Link provides the best possible customized solution according to the requirement of respective clients.
No comments:
Post a Comment